Much like an advanced retention firearm holster.
The Revolution Scabbard-designed specifically for ASP Talon Batons-provides a high level of security without compromising rapid access.
Simply press and pivot the cover, then draw the baton, all in a fast, smooth and intuitive series of motions. The enclosed-bottom polymer case allows the Talon Baton to be closed directly into the scabbard, and the cover locks automatically when rotated back into retention mode.
The Revolution Scabbard is ambidextrous, and features ASP’s patented Snap-Loc Clip. It’s adjustable to fit belts up to 2.25” wide, or MOLLE gear, and allows the scabbard to rotate through 180 degrees and 7 click-stop carrying positions.
Attach the scabbard to the belt employing the integral belt loop. The adjustment bar is used to change the belt width. Sizes are engraved on the back plate. Slide the bar into the appropriate track from the right. The adjustment bar is locked into place by the Snap-Loc cover.
Secure your Talon Baton in the Revolution Scabbard by simply pressing and pivoting the cover in either direction, now place your retracted baton tip down into the carrier, by rotating the cover back into the upright locking position you have now secured your baton.
**Note** Spare back plate screws are included in pockets under the back plate inside the scabbard. The back plate of the scabbard can be removed with the included hex tool. Remove the hex key with the double lock pin of a handcuff key.
If required to lock the Revolution Scabbard into a non-rotating position, insert the gold adjustment screw into the back plate hole connecting the back plate to the belt loop. Black screws hold the back plate in place.
This scabbard fits the Talon 60cm (T60) Baton. Also available to fit T40 and T50 sizes.
**Important** The Revolution Scabbard is designed to be used with stock standard configuration ASP Talon Batons. Baton attachments, including accessory tips and grips, may impede operation of rotating hood.
WATCH THE VIDEO.