Designed to fit on Mil-spec 1913 Picatinny Rail Platforms and machined from 6061-T6 aluminium alloy and 4605 steel with matte black hard coat anodize.
Leapers UTG-PRO P.O.I Aluminium 30mm Picatinny Scope Mounts are performance guaranteed to withstand the toughest field conditions and won't move under heavy recoil, and they are Proudly Made in the USA and are also .50 BMG RATED.
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube, and up to a 59mm Outer Objective
High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 30mm Tube, and up to a 73mm Outer Objective
Base to fit on Picatinny rails dimensions. 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width.
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings:
Progressively Machined for a Precise Inner Diameter Scope Interface to Achieve a Seamless Ring-to-Scope Interaction
Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring-Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
**NOTE** We recommend tightening the ring top screws with a torque value of about 25 inch-lb and the side plate screws with a torque value of about 45 inch-lb.