Nitecore TINI2 - 500 Lumen LED Rechargeable Keychain Light

Operating Instructions

Multifunctional OLED Display

• TINI2/TINI2 SS/TINI2 Ti is equipped with a multifunctional OLED display. (Please remove the screen protector before the first use.) When the light is turned on, the screen will successively show the current info (Brightness Level & Lumens, Runtime Remaining, User Mode) before it goes out. After the screen goes out, short pressing the Mode Button can reactivate the screen.

Display Demonstration Function

• This function is used for demonstration ONLY. It does not reflect the actual light status.
• When the light is off, press and hold the power button even after the light accesses ULTRALOW until the light is turned off to enter the display demonstration.
• In this status, the screen will cycle through various informational displays.
• Short press either button to exit this status.

On / Off

• On: When the light is off, short press the Power Button to turn it on.
• Off: When the light is on, short press the Power Button to turn it off.

User Modes

• TINI2/TINI2 SS/TINI2 Ti has 2 user modes, DEMO Mode and DAILY Mode.
• DEMO Mode: The light will automatically shut down if there is no operation in 30 seconds (reactivating the screen excluded). The countdown will be displayed on the screen.
• DAILY Mode: The light will not automatically shut down and will need to be shut down manually.
• Note: The default setting is DEMO Mode. It is recommended to switch it to DAILY Mode when in daily use.

Mode Switching

• When the light is on/off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode.
• The LED will flash to indicate the current user mode: 1 flash to indicate DEMO Mode and 2 flashes to indicate DAILY Mode.
• (In this process, the screen will show “DEMO” or “DAILY” to indicate the current user mode.)
• Note: Reactivating the light within 3 seconds after it automatically shuts down in DEMO mode will temporarily access DAILY Mode until it is turned off.

Brightness Levels

• When the light and the screen is on, short press the Mode Button to cycle through “ULTRALOW – LOW – MID - HIGH”. The flashlight will directly access the previously memorized brightness level when reactivated.
• Note: When the screen is off, short press the Mode Button to activate the screen before adjusting the brightness level.

Direct Access to ULTRALOW

• When the light is off, long press the Power Button to directly access ULTRALOW.

Direct Access to TURBO

• When the light is on/off, press and hold the Mode Button to access TURBO. Release to return to previous status.

Lockout / Unlock

• TINI2/TINI2 SS/TINI2 Ti has two lockout modes (Half Lockout Mode and Full Lockout Mode).

Half Lockout Mode (Lockout 1):

• When the light is on, press and hold the Power Button until the screen shows the Lockout 1 icon to access Half Lockout Mode.
• When in Half Lockout Mode, the Power Button is unavailable to activate the flashlight. Holding the Mode Button is still available for accessing TURBO.

Full Lockout Mode (Lockout 2):

• When the light is on, press and hold the Power Button even after accessing Half Lockout Mode, until the screen shows Lockout 2 icon to access Full Lockout Mode.
• When in Full Lockout Mode, both buttons are unavailable to activate the flashlight.

Unlock:

• In either Lockout Mode, short press and then long press the Power Button, during which the screen will show an unlock icon and a progress bar, until the flashlight is activated to exit Lockout Mode. The light will access the previous memorized level.
• The light will be automatically unlocked when being recharged in either Lockout Mode.

ATR (Advanced Temperature Regulation)

• The integrated ATR technology regulates the output of the TINI2/TINI2 SS/ TINI2 Ti according to the working condition and ambient environment to maintain the optimal performance.

Power Indication

• When the light is off, short press the Mode Button to display the battery level, the battery voltage, the memorized brightness level and the current user mode before it goes out. Different voltages represent the corresponding remaining battery power levels:
• Note: When the battery voltage is below 3.4V, the power indicator beneath both buttons will flash blue every 2 seconds to inform the user to recharge the battery as soon as possible.

Charging Function

• TINI2/TINI2 SS/TINI2 Ti is equipped with an intelligent charging system. Please charge the battery before the first use.
• Connecting to the External Power: Use the USB cable to connect an external power supply (e.g. a USB adapter, a computer or other USB charging devices) to the USB port to begin the charging process. The charging time is approx. 1 hour 45 minutes.
• Charging Indicator: When the charging status is normal, the charging indicator will flash slowly to inform the user and the screen will show the current battery level. When the battery is fully charged, the charging indicator will become steadily turned on to inform the user and the screen will display a full battery level.